Twin Vent II
General Information
- Simulation device
- Category P1
- Diameter: 40 ±5mm
- Length: 160 ±5mm
- Net Explosive Content (N.E.C): 35 ±7g
- Total Weight (GW): 130 ±15g
- Ignition Type = Wire Pull®
- Effect: non-toxic coloured smoke
- Smoke Duration: 25s ±10s
Safety
- Safety distance = 2m
- For outdoor use only, do not use indoors.
- Do Not supply to persons under 18 years of age.
- Always use Gloves and Eye protection.
- Do Not carry in pockets, use EG approved pouch.
- Avoid inhalation of smoke.
- Do Not use in confined spaces or places where others cannot easily leave the smoke area.
- Do Not hold while device produces smoke.
- Do Not point at other people.
- Do Not place on or near flammable materials.
Disposal
- Submerge device in a bucket of water allowing water to enter the product. Leave soaking for a minimum of 48 hours in a secure area.
- Once cool, used products can be disposed of in normal waste bins
- Dispose of the product according to local or national regulations.
- If a product fails to ignite, you can either use the original packaging to return to the distributor or place of purchase. Ensure products are secure within the package and package is properly sealed, marked, and labelled. Send using an approved courier.
Further Resources
Twin Vent II In Action
Commonly used in photography, film, and combat simulation, the Twin Vent II is operated by pulling the ring out of the side of the product. 25 seconds of coloured, non-toxic smoke will follow.
Smoke from the Twin Vent is delivered from both ends of the device. Always refer to the instructions printed on the side of the product before using.
